MASINEXPORT TRADING |
Hydraulic Press 3000 Tons |
STANDARD FEATURES • Closed bed structure • Fixed table with T-slots for dies setting • Automatic ram locking at stroke upper end by electro-hydraulic system • Lower cushion with 2 cylinders (4 columns guiding) |
• 6 Hydraulic units • 3 Ram drive cylinders • Oil cooling included in the hydraulic plant (water cooling) unit • Separate electical cabinet • 2 Control panels • Upper supports and access ways • Upper protection railing |
TECHNICAL SPECIFICATION |
The presses may be used only for stamping operations, by observing the following terms: -the stamping force shall be to 2/3 of the rated force of the ram, under a proper adjustment of cushion pressure; -over this value the stamping methods shall be used under a damping system, since the action of the cushion shall be completely or partly removed. |
Upper effect - Ram |
|
|
• Max. closing force (adjustable) |
tons |
3000 |
• Opening force |
tons |
280 – 300 |
• Number of ram driving cylinders |
- |
3 |
• Main cylinder Piston diameter |
- mm |
One / single effect 1250 |
• Lower cushion cylinder Piston diameter |
- mm |
Two / single effect 300 |
• Size of fixed table |
mm |
2500 x 3000 |
• Sixe of moving table |
mm |
2500 x 3000 |
• Stroke of moving table |
mm |
2000 |
• Max. distance between tables |
mm |
3500 |
• Min. Distance between tables |
mm |
1500 |
• Rapid closing speed |
mm/sec. |
200 – 220 |
• Working speed |
mm/sec. |
10 |
• Retraction speed |
mm/sec. |
100 |
|
|
|
Lower effect - Cushion |
|
|
• Retraction force (adjustable) |
tons |
1000 |
• Releasing force |
tons |
300 |
• Stroke |
mm |
2500 |
• Working speed (at 1000 tons) |
mm/sec. |
20 |
• Retraction speed |
mm/sec. |
50 – 100 |
|
|
|
• Installed power |
kW |
230 |
• Hydraulic circuit pressure |
bar |
245 |
|
Closed bed type Hydraulic Press for shipyard works 3500 kN |
PHO - 350N |
|
Curving Hydraulic Press for shipyard works 2000 kN |
PCP - 200N |
|
Hydraulic Press for pressing powders 2500 kN |
PHO - 250PP |
|
Hydtaulic Press for thermorigid plastics 1000 kN and 1600 kN |
PHO2 - 100TR PHO2 - 160TR |
|
Open bed type horizontal Hydraulic Press for profiles straightening 6300 kN |
PHCO - 630 |
|
Closed type Hydraulic Press for pressing-depressing waggon wheels 4000 kN |
PRV - 400 |
|
Hydraulic Press for deep drawing 2500 kN and 4000 kN |
PHA - 250 PHA - 400 |
|
Moulding Hydraulic Press 250 kN |
PHF - 25 |